Maintenance Of Hydraulic Pump Of Hydraulic Press

Source：Shuntec Update：2022-03-28-10:02:45Views：159

The newly purchased hydraulic equipment of the hydraulic press should be replaced with the hydraulic oil once every 100 hours of operation. Because in the newly installed hydraulic components and pipes, there are still uncleaned casting sand, dust particles, oxide scale and iron filings, and other contaminants. After the hydraulic system works for a period of time, after being washed and vibrated by the pressure oil, it will fall off into the oil return filter or the oil tank, so the oil in the oil tank should be released, and the oil tank should be thoroughly flushed with kerosene.

1. The oil level in the hydraulic oil tank should be kept within the specified range. If the oil level is too low, the hydraulic equipment will lose control or make noise. Therefore, the hydraulic equipment should always observe the oil level in the oil tank during operation.
2. During the working process of hydraulic machinery, the oil circuit should be checked frequently for leakage. The seals in the hydraulic system are vulnerable parts and should be replaced in time if oil leakage is found.
3. When the hydraulic oil temperature exceeds 60℃, it is recommended to install a cooler in the oil return system to ensure that the oil temperature of the hydraulic system operates below 60℃.

Shuntec –  Hydraulic press machine manufacturer.

Email：mattchan@shuntecpress.com

WhatsApp:  +86 15019281386

Previous:Xindongjiang Purchases Shuntec’s Oil Pressure Heat Press Next:Siemens CNC (Nanjing) Purchases Shuntec’s Servo Press

Relevant recommendations:

Classification Of Hydraulic Press Introduction Of Servo Press Features Of 100-Ton Jigsaw Puzzle Hydraulic Press Maintenance of Fire Extinguisher Cylinder Deep Drawing Hydraulic Press Features Of 100 Ton Single Column Hydraulic Press Working Principle Of Tea Cake Briquetting Hydraulic Press PP Plastic Packing Box Board Pressing And Forming Hydraulic Press