Source：Shuntec Update：2022-02-17-05:59:38Views：112
1. Carefully check and clean the hydraulic oil tank before refueling the hydraulic press. After filtering the oil through a 100 mesh or larger filter, inject it into the fuel tank. Hydraulic oil should be replaced every 8-12 months and should be checked regularly every month. When replaced, the effective volume of the hydraulic oil tank is approximately 520 liters. NOTE: Clean the tank before refueling the hydraulic press. It is strictly forbidden to use cotton cloth or cotton cloth, it is recommended to use silk cloth or edible flour.
2. It is recommended to use 46# anti-wear hydraulic oil for the hydraulic working fluid of the hydraulic press, and the ambient temperature is 0-45℃.
3. When the hydraulic machine is refueling, pay attention to the oil level height at the middle position on the liquid level gauge, but it must not be lower than or exceed the range of the liquid level gauge. During the debugging process, attention should be paid to the change of the hydraulic oil level of the hydraulic press. Replenish the hydraulic oil at the low position of the oil level after parking.
Shuntec – Hydraulic press machine manufacturer.
Email：mattchan@shuntecpress.com
WhatsApp: +86 15019281386
Classification Of Hydraulic Press Introduction Of Servo Press Features Of 100-Ton Jigsaw Puzzle Hydraulic Press Maintenance of Fire Extinguisher Cylinder Deep Drawing Hydraulic Press Features Of 100 Ton Single Column Hydraulic Press Working Principle Of Tea Cake Briquetting Hydraulic Press PP Plastic Packing Box Board Pressing And Forming Hydraulic Press
