Source:Shuntec Update:2022-05-12-10:11:34Views:103
The whole press-fitting process of the motor servo press is divided into six links: quick release, detection, pre-press, press-fit, pressure-holding, and return. On startup, the machine will automatically find the endpoint of the mechanical device or set the offset endpoint.
The pressing process of the motor servo press:
Motor servo press-fast forward: empty stroke, fast speed.
Motor servo press-probing: The process of part alignment is slow.
Motor servo press-preloading: press in quickly after alignment, and the speed should be fast.
Motor servo press-pressing: It needs to be stopped in time before the end of pressing, and the speed should be slow.
Motor-servo press-holding pressure: hold the pressure after the press-fitting.
Motor servo press-retraction: After the pressure holding is over, it returns to the starting position quickly, and the speed is fast.
When it is pressed to the setting position, the pressure will be maintained according to the holding pressure time set by the customer. After the holding pressure time is completed, the pressure head will return to the set working endpoint at the set speed.
Shuntec – Hydraulic press machine manufacturer.
Email:mattchan@shuntecpress.com
WhatsApp: +86 15019281386
Classification Of Hydraulic Press Introduction Of Servo Press Features Of 100-Ton Jigsaw Puzzle Hydraulic Press Maintenance of Fire Extinguisher Cylinder Deep Drawing Hydraulic Press Features Of 100 Ton Single Column Hydraulic Press Working Principle Of Tea Cake Briquetting Hydraulic Press PP Plastic Packing Box Board Pressing And Forming Hydraulic Press