Source:Shuntec Update:2022-04-26-10:05:51Views:156
1. Reduce mass and save material. For typical parts such as automobile engine, brackets and radiator brackets, the hydroformed parts of the four-column hydraulic press are 20% to 40% lighter than stamping parts; for hollow stepped shaft parts, the weight can be reduced by 40% to 50%.
2. Reduce the number of parts and molds and reduce mold costs. Hydroforming parts usually only need one set of dies, while stamping parts mostly require multiple sets of dies. The number of hydroformed engine bracket parts has been reduced from 6 to 1, and the number of radiator bracket parts has been reduced from 17 to 10.
3. It can reduce the amount of welding in subsequent machining and assembly. Taking the radiator bracket as an example, the heat dissipation area is increased by 43%, the number of solder joints is reduced from 174 to 20, the number of processes is reduced from 13 to 6, and the productivity is increased by 66%.
4. Improve the strength and stiffness, especially the fatigue strength. For example, the stiffness of the hydroformed radiator bracket can be increased by 39% in the vertical direction and 50% in the horizontal direction.
5. Reduce production costs. According to the statistical analysis of the applied hydroformed parts, the production cost of the hydroformed parts of the four-column hydraulic press is 15% to 20% lower than that of the stamping parts on average, and the mold cost is reduced by 20% to 30%.
Shuntec – Hydraulic press machine manufacturer.
Email:mattchan@shuntecpress.com
WhatsApp: +86 15019281386
Classification Of Hydraulic Press Introduction Of Servo Press Features Of 100-Ton Jigsaw Puzzle Hydraulic Press Maintenance of Fire Extinguisher Cylinder Deep Drawing Hydraulic Press Features Of 100 Ton Single Column Hydraulic Press Working Principle Of Tea Cake Briquetting Hydraulic Press PP Plastic Packing Box Board Pressing And Forming Hydraulic Press