Source：Shuntec Update：2022-03-09-09:13:07Views：162
Hydraulic presses are now used in the industrial field, and a large number of hydraulic components are becoming more and more complex. It matches the requirement of precision day by day. Therefore, when the hydraulic system is installed, once impurities or metal powder are mixed in, it will cause the wear of the hydraulic components, jamming, and other undesirable phenomena. In severe cases, serious accidents may occur.
Therefore, in order for the hydraulic system to achieve the best working performance and service life, the cleanliness of the system should be ensured. When ensuring the cleanliness of the hydraulic system, the most important measure is to clean the system before installation and operation.
When cleaning the hydraulic system, the cleaning oil should be selected. The normal system pipeline oil tank is relatively clean, and the viscosity of the working fluid or the same cleaning oil can be used. Once it is found that the system is not clean, the cleaning will be slightly lower viscosity oil cleaning. When cleaning the heating oil, the accessories of the heating oil system are easy to fall off. Usually, it will be heated to about 50 to 60 degrees. Therefore, the cleaning flow rate is as large as possible to facilitate the removal of dirt.
Shuntec – Hydraulic press machine manufacturer.
Email：mattchan@shuntecpress.com
WhatsApp: +86 15019281386
Classification Of Hydraulic Press Introduction Of Servo Press Features Of 100-Ton Jigsaw Puzzle Hydraulic Press Maintenance of Fire Extinguisher Cylinder Deep Drawing Hydraulic Press Features Of 100 Ton Single Column Hydraulic Press Working Principle Of Tea Cake Briquetting Hydraulic Press PP Plastic Packing Box Board Pressing And Forming Hydraulic Press
